4.3 Storage of Inverter
The following requirements should be met if the inverter will not be deployed
immediately:
•Do not unpack the inverter (put desiccant in the original box if the inverter is unpacked).
•Store the inverter at a temperature range of -30° C to +70° C, and with the relative
humidity of 0% to 100% (no condensing).
•In case of stacking storage, the number of stacking layers should never exceed the limit
marked on the outer side of the packing case.
•The inverter should be stored in a clean and dry place and be protected from dust and
water vapor corrosion.
•Do not position the inverter at a front or excessive back or side tilt, or upside down.
•Conduct periodic inspection during storage. Replace the packing materials immediately
if any rodent bites are found.
•Ensure that qualified personnel inspect and test the inverter before use if it has been
stored for a long time.
To Next Page
Loading...
