6.9.3 Parallel Connection (Optional)
Parallel Connection function of the hybrid inverter is a solution for system capacity
extension to provide bigger power. This inverter supports 2 units in parallel now
(need to purchase an additional parallel kits). For the specific operation, please
refer to the parallel instructions.
Notes:
Only two units with the same capacity, voltage and frequency can be coupled
via the provided parallel cable to run in parallel mode.
In Parallel system, one inverter will be set as the "Master inverter" which will
control the other inverter's energy management and dispatch control.
In Parallel system, the grid input and the load outputs can be connected in
parallel.
In Parallel system, the two inverters communicate through the provided RJ45
parallel communication cable (PAL cable).
6.9.4 EV charger Connection
This inverter is ready for you to use solar energy to charge your electric car. For
specific operations, please refer to the LIVOLTEK EV charger user manual.
Notes: This inverter can only be connected with LIVOLTEK EV charger now.
To Next Page
Loading...
