MAINTENANCE
The following steps should be performed on a regular basis to maintain your Lloyd table in a smooth operating
condition and to assure its long life and top quality appearance.
*
An initial inspection and periodic future inspections should be made to insure that nuts
and bolts have not loosened in shipping or during daily operations.
*
Your Lloyd table should be lubricated every six months. Parts to be lubricated are all
pivot points, and metal to metal sliding mechanisms.
(DO NOT LUBRICATE FRICTION LOCKS)
*
The cushions should be cleaned daily with a mild soap & warm water solution to
remove body oils. Rinsed & dried
*
Chrome parts should be cleaned on a weekly basis for appearance.
*
The hydraulic fluid recommended for the pump, is a lubriplate HO1 hydraulic oil, and
*
Perform periodic inspections for oil leaks or drips.
Page 2
To Next Page
Loading...
