Operating Manual
Tangential Rolling System T18F - T27F
13
4.2 The rolling head holder
The rolling head holder serves as an adapter between the machine tool and the rolling
head. Since machine tools are available in many versions (e. g. multi-spindle, turning
centers etc.) from different manufacturers, this requires that the rolling head holder
also needs to be adapted to the highly individual machine conditions. The rolling head
holder mount has been adapted to the respective mounted tool holder of the machine,
e. g. T-slot, parallel shank, prisma or square mount.
Figure 5: Different rolling head holder versions
On our homepage www.fette.de/rk/fettekat you can find a list of possible applica-
tions with Fette tangential rolling heads on different machine tools. This database is
c onstantly updated. If your application is not included, please contact us.
A drawing of the working areas in the machine is definitely helpful.
Table 4: Holder for machine (excerpt from the Internet)
LMT_Bedienungsanleitung_T18F_T27F_e.indd 13 02.08.11 17:40
To Next Page
Loading...