LNS Quick Load Servo 80 - A30 - Bar stock loading error

CHAPTER 1: ALARMS
QUICK LOAD SERVO 65/80
1-19
A30 – Bar stock loading error
BAR STOCK LOADING
ERROR!
-MAGAZINE RACK EMPTY
-WRONG SET UP
A30
Description:
The « Bar stock loading error » alarm is generated when no material is detected in the guidance zone and
the PLC detects the input (I25 – SQ3) when the loading finger is at the most advanced position. That
means that there is no material on the loading table.
Solution:
Load new material on the magazine.