Loewe AudioVision - Initial Menu Configuration; Menu Language and Navigation; Disc Language and Main Menu Access

Start-up
Menu Language
During the first operation you will be asked to choose the language you want to
use in the menus of the AudioVision.
Menu Language
Deutsch
English
Français
Italiano
Español
Nederlands
Select Adopt
 Select required language.
Confirm with OK.
You can change the Menu Language at any time.
Call up Main Menu.
 Select option LANGUAGE.
 Select option Menu Language.
 Select required language.
Confirm OK.
Close menu.
Main Menu
The menu of the AudioVision will appear on the screen of the connected TV set.
Here you can make the necessary settings.
END
S
X Select
LANGUAGE
Menu Language
Disc Audio
Disc Subtitle
Disc Menu
English
English
Off
English
Move
➠ To be able to call up the Main Menu, if necessary close other
menus first using
.
Navigation in the Menu
In these operating instructions, the arrow buttons on the Assist Remote Control
are shown as follows:
In the text, the arrows correspond to: ””.
The OK button on the remote control is shown as OK in the text.
Call up Main Menu.
 Select ”required” option.
Previous menu.
Close menu.
Confirm OK.
Disc Languages
Select a language for the menu, the sound and the subtitles of the disc. If you
want to use a language other than the ”original” version of the disc, then select
it here if it is available on the disc.
Call up Main Menu.
 Select option LANGUAGE.
  Select option Disc Audio, Disc Subtitles or Disc
Menu .
 Select required option.
Off Switch off Subtitles on Disc
Original The original language of the disc is selected.
Others Select another language (page 32).
Confirm OK.
Close menu.
- 16