35 -
english
Adjusting the picture
MENU: Call TV menu.
Select Picture,
go to the menu line below.
Select the desired picture function,
go to the menu line below.
Make changes.
Explanations of the picture settings:
You can switch between three fixed picture setting vari-
ants and the three personal picture values that you have
set here (see page 36).
The contrast setting depends on the brightness of the
room. The brighter the surroundings the higher the
contrast should be set.
The power consumption of the TV set is directly depend-
ent on the value set here (see also page 22).
Set the brightness so that the black areas of the picture
only just appear black.
Set the colour intensity to suit your personal taste. The
colours should appear natural.
Here, you can give the TV picture a warmer or colder hue
according to your personal taste.
Here you can adjust picture sharpness to obtain the best
definition.
If this auto dimming is active then the television picture
contrast is automatically reduced when the room bright-
ness diminishes (Optical Power Control – OPC). This will
also reduce the power consumption of the TV.
Call with OK (see right hand column).
Explanations of the picture settings (continuation):
Turn image enhancement on/off.
Set picture format (see page 36).
Move picture vertically (see page 36).
Automatic detection and setting of the picture format
for Cinemascope or widescreen movies.
With active DNC (Digital Noise Control) you can eliminate
or reduce picture noise.
Set the geometry of the picture (see page 89).
Contrast Brightness Colour intensity Colour tem
To Next Page
Loading...
Need help?
General