85 -
english
Connections menu
Settings for the connection of external appliances are made in this menu.
Calling the connections menu
MENU: Call TV menu.
Select Connections,
go to the menu line below.
Select the desired setting.
Explanations of setting possibilities in the Connections menu:
The sound components wizard helps you to configure the
components which are used to reproduce the TV sound.
You will find a description of the sound components
wizard on page 90.
Here you can set the parameters of the DVB-T and the
DVB-S antenna with the antenna wizard. The setting op-
tions of the DVB antennas are described in the first time
operation routine (from page 22).
See right column for explanations.
Here you can specify whether the TV set should switch
itself on automatically from standby mode when a disc
is played or a screen menu is displayed on connected
Digital Link HD-capable equipment which is connected
via HDMI (see page 88).
AV connection settings
In the AV connection settings menu the parameters for the AV and AV-
VIDEO connection sockets can be adapted.
Calling AV connection settings
MENU: Call TV menu.
Select Connections,
go to the menu line below.
Select AV connecting settings,
go to the menu line below.
Select the desired setting.
Explanations of setting possibilities in the AV connecting settings menu:
You set the AV standard of the connected appliance to
AV or AV-VIDEO here.
Normally you leave the setting on Automatic. If the
standard of the connected appliance is not detected
automatically, select the right standard.
Ask your dealer or consult the operating manual of the
connected appliance if necessary.
You set the signal type of the device connected to AV or
AV-VIDEO here. Normally, you should leave the setting
at Automatic; otherwise select a suitable signal type. You
can find out more from your dealer.
If this function is activated and you switch an AV device
(not at AV-VIDEO) that outputs a switching voltage to
playback, its picture and sound will be played immediately
on all TV station slots.
External devices
Sound
components
Antenna DVB
AV connecting
settings
Remote TV
switch on via
Digital Link
Antenna DVB AV connecting settings Remot
To Next Page
Loading...
Need help?
General