Loewe Connect - Setup Possibilities; Instruction for Wall Installation

- 100
english
Setup possibilities
Connect 26
• Table Stand (delivery status)
• Floor Stand C 22/26
• Wall Mount Flex 26 S (see note in right-hand column)
Instruction for wall installation
Please not the following points when using a wall holder:
See the disassembly sketch. Place the TV set on a soft underlay on a
table as shown.
Remove the four screws. Remove the Table Stand.
IMPORTANT: The bottom two screws must be screwed back in afterwards
to stabilise the set:
Now mount the wall holder as described in the installation instructions.
Accessories
Table Stand
Floor Stand C 22/26
Wall Mount Flex 26 S