Controlling the PTZ camera with LNR / NR Series NVRs
6
2. Click the Preset tab.
3. Under the Preset text box, enter the number of the preset you want to
create.
4. Move the camera to the desired position and click Set.
NOTE
Click Del Preset to delete a preset.
To go to a preset:
• Under No., select the number of the preset you would like to go to and click
.
6.2.2 Tours
Tours will cycle through a set of presets.
To create a tour:
1. Click
to open the PAN/TILT/ZOOM menu.
2. Click the Tour tab.
#LX400020; r.41770/42005; en-US
19
To Next Page
Loading...
Need help?
General
