Lorex LNZ32P12 series - Auto Scan

Controlling the PTZ camera with LNR / NR Series NVRs
6
6.2.4 Auto Scan
An auto scan automatically cycles between a left and right point.
To create a new auto scan:
1. Click
to open the PAN/TILT/ZOOM menu.
2. Click the Border tab.
3. Move the camera into the desired left position and click Left.
4. Move the camera into the desired right position and click Right.
To run an auto scan:
• Click
.
#LX400020; r.41770/42005; en-US
21