Connecting the Camera
3
3.4 Adding the PTZ camera to the LNK Series NVRs
To add the PTZ camera to the LNK Series NVRs:
The following instructions are based on the LNK7000 Series NVR. See your
NVR’s instruction manual for instructions on controlling the PTZ camera with
your system.
1. From live view, hover over a blank channel. Click
in the center of the
channel to add the PTZ camera from the LAN. A Quick Add menu opens.
NOTE
If prompted, enter the system user name (default: admin) and your password.
2. Click Search. The NVR scans the network for compatible cameras. A list
of compatible cameras appear on the left-side of the screen
3. Click the camera you would like to add. The selected camera’s attributes
appear on the right-side of the screen.
4. Under Protocol, select ONVIF.
5. Click Add.
#LX400020; r.41770/42005; en-US
8
To Next Page
Loading...
Need help?
General
