Installation4
9. Connect the camera cable as shown in the 3 Connecting the Camera section, then feed the
cables through the cable hole in the back plate (attached to the mounting surface).
CAUTION
If you run the cables along the mounting surface, you must run the cable through the side notch on the
wall mounting bracket. The camera cable will hang alongside the wall mounting bracket — see image
below for reference:
1. Side Notch
10. Lower the wall mounting bracket onto the back plate. Ensure that the 2 metal flaps on the
back plate lock into the 2 grooves in the wall mounting plate.
#LX400075; r. 4.0/58710/58717; en-US 11
To Next Page
Loading...
Need help?
General
