7 Controlling the PTZ camera with
LNK Series NVRs
The following instructions are based on the LNK7000 Series NVR.
See your NVR’s instruction manual for instructions on controlling the
PTZ camera with your system. For the latest list of compatible NVRs,
please visit lorextechnology.com/compatibility.
To connect the PTZ camera to the system:
1. Connect the camera to your NVR as detailed in 3 Connecting the
Camera, page 4.
2. Right-click anywhere on the live viewing mode to open the Quick
Menu, then select Main Menu.
NOTE
If prompted, enter the system user name (default: admin) and
your password.
3. Under Settings, click Display to open the IP Camera tab.
4. Click
next to the connected PTZ camera you want to edit.
The camera attributes appear.
5. Under Protocol, select ONVIF.
#; r. 4.0/47037/47040; en-US 28
To Next Page
Loading...
Need help?
General
