5 Controlling the PTZ Camera with an
NVR
The camera can accept PTZ commands directly through the Ethernet
cable. There is no need to run special wiring to control the movement
of the PTZ camera.
LNZ44P12 camera is compatible with LNR / NR / LNK Series NVRs,
excluding the LNR200 and LNR300 Series NVRs.
• For instructions on controlling the PTZ camera with the LNR / NR
Series NVRs, see 6 Controlling the PTZ camera with LNR / NR
Series NVRs, page 19
• For instructions on controlling the PTZ camera with the LNK Ser-
ies NVRs, see 7 Controlling the PTZ camera with LNK Series
NVRs, page 28
#; r. 4.0/47037/47040; en-US 18
To Next Page
Loading...
Need help?
General
