3 Connecting the Camera
3.2 Connecting Cameras to the Local Area Network (LAN)
For flexibility, you may also connect the camera to the same Local
Area Network (LAN) as the NVR. This is accomplished by connecting
the camera to the same router as the NVR. For these installations, an
external PoE+ switch (sold separately) or power adapter (included)
must be used to provide power to the camera. You also must add the
camera on the NVR before it will show a picture on the monitor or be
recorded by the NVR.
#; r. 4.0/47037/47040; en-US 5
To Next Page
Loading...
