7 Controlling the PTZ camera with LNK Series NVRs
To use the PTZ controls:
1. Channel: Select the channel of the PTZ camera you want to
control.
2. Navigation Controls: Click the directional arrows to move the
PTZ camera. Click
to begin autopan (PTZ camera pans
around automatically).
3. Start Cruise: Cycles between preset viewing points
automatically.
4. Close PTZ Controls
5. Speed: Set the speed of the PTZ camera’s movement.
6. Zoom: Click –/+ to zoom in or out.
7. Focus: Click –/+ to adjust the focus.
#; r. 4.0/47037/47040; en-US 30
To Next Page
Loading...
Need help?
General
