10 Inserting the microSD Card (Optional) and Resetting the
Camera
3. The service panel allows you to perform the following:
• Insert a microSD card into the microSD card slot. For local re-
cording, you can install a microSD card up to 128GB. San-
Disk™ or Kingston™ brand microSD cards are
recommended. microSD card Class 10 or higher required.
• Press and hold the reset button for 10 seconds to reset the
camera to default settings
NOTE
It may take few minutes for the camera image to reappear
on the screen.
1. Service Panel
2. microSD Card Slot
3. Reset Button
#; r. 4.0/47037/47040; en-US 40
To Next Page
Loading...
Need help?
General
