Operation Instruction
condition. Otherwise troubleshoot it.
3.4 Start the tractor
Keep the engine runs with a low speed, depress the clutch
pedal and then place the gear lever of gearbox to a required
position.
Press the Parking brake handle A.
Whistle and determine there are no obstacles around.
Increase engine speed gradually and release the clutch pedal
slowly for smooth starting of the tractor. After starting, release
the clutch pedal rapidly to avoid clutch slips.
Gradually depress down the accelerator to allow the tractor to reach the needed working speed.
It is not allowed to reduce tractor traveling speed with the clutch half-engaged. Do not place your foot on the
clutch pedal during driving to avoid wears of quick release lever and friction lining.
Important:
It is not allowed to start with high gears engaged to avoid gear impact of the gearbox drive gear and clutch early
wears. Prior to starting, it is necessary to release the parking brake to avoid operating component damages.
Figure 3-12 Start the tractor
23