Lovol TE304 - 11 Appendixes; Oil, Fuel and Solution Used for Tractor

Appendixes
11 Appendixes
11.1 Oil, fuel and solution used for tractor
Table 11-1 Oil, fuel and solution used for tractor
Used parts Oil, fuel and solution
Fuel tank
Domestic
standard
Meet GB/T
252 light
diesel
Over
20 ℃
(4
～ 20) ℃ (-5 ～ 4) ℃ (-14 ～ -5) ℃ (-29 ～ -35) ℃
10# 0# -10# -20# -35#
International
standard
Adopt American Society for Testing and Materials fuel D-975, with grade of 2-D
at normal temperature and with grade of 1-D at ambient temperature of below
5 ℃.
Engine oil
sump
Domestic
standard
Fill fuel according to engine instruction
International
standard
In accordance with Society of Automotive Engineers,
Viscosity is classified into SAE10W-40 below -5 ℃,
and SAE15W/40 over -5 ℃.
Quality should be meets American Petroleum
Institute API CD standard
Engine
radiator
If ambient temperature of 4℃ or more： Clean softwater
If ambient temperature of 4 ℃ or l ess： Antifreeze liquid must be used
If min. ambient temperature of -15 ℃or more, adopt -25# long effective antifreeze
(SH/T0521-1999)
If min. ambient temperature of -25 ℃
or more, adop
-
35#long effective
antifreeze(SH/T0521-1999)
If min. ambient temperature of -35 ℃or more, adopt -45# antifreeze(SH/T0521-1999)
Oil-bath type
air cleaner
Domestic
standard
Use 10W/30 if -5℃ or less, use 15W/40 multigrade oil if -5 ℃or more.
CC or CD grade in GB 11122-2006.
International
standard
In accordance with Society of Automotive Engineers,
Viscosity is classified into SAE10W-40 below -5 ℃,
and SAE15W/-40 multigrade oil over -5 ℃. Quality should be meets American
Petroleum Institute API CD standard
Gearbox- rear
axle
Hydraulic
lifter
Front drive
axle
Domestic
standard
N100D dual-
purpose oil used for drive and hydraulic system. Executive
standard: Q/LWZ B119-2008
International
standard
MF1135 from Massey Ferguson
Or M2C 86A from Ford
Or HY-GARD
TM
or J20A、J20B、J20C from John Deer
Brake
Domestic
standard
Drive hydraulic brake three-purose oil or SAE10W-40 oil
International
standard
SAE10W-40 oil
Oil cup
Domestic
standard
General-purpose lithium base grease, subject to GB/T 7324;
International
standard
SAE general purpose grease is added with 3~5% molybdenum sulfide;
Use polar region grease (MIT-G-10924C)if below -30 ℃;
Adopt National Lubrication Grease Institute NJGI grease D-217 with 2 viscosity
grade;
79