Delivery, Acceptance & Transportation
7 Delivery, Acceptance & Transportation
7.1 Delivery and Acceptance
When the user purchases tractor, acceptance inspection shall be performed for the following terms:
● Whether vehicle documents are complete or not
Vehicle documents include: The User Manual for Tractor Operation, The Product Certificate, Three
Guarantees certificate, A Pack List of Vehicle Items
, and the “Technical Document for Engine” (from
the engine manufacturer), Tractor Parts and Components Schematics Diagram.
numbers for Product Certificate, Three-Guarantee Service Certificate
and Technical Document of
Engine are consistent with appropriate machine numbers.
● Whether vehicle items are complete or not
Check items with tractor in accordance with Pack List of Tractor Items. These items include spare parts
and tools for tractor. These are standardized with specifications of the “Technical Documents for
Engine” (if you have any questions, contact with the dealer).
● Whether the tractor is in a good operation state
The machine might be changed in technical features by shipment. The machine features shall be
identified further by user on purchase of machine.
7.2 Transportation
When driving, strictly follow traffic rules for self-
propelled movement on the road. The space between two
vehicles is at least 60m in order to avoid collision caused by accident; if adopting load shipment, you should
ensure:
● Loading and unloading works of tractor are completed on the flat ground.
● Loading and unloading works are performed by special unloading deck. .
● There are on-
site assistant in charge of guidance work, and the personnel shall be away from unloading
area.
●
After loading work has been completed, suspension rod shall be put on the lowest position, pull up hand
brake, and engage reverse gear, then pull out start key and lock the door, turn off the switch.
● Position 4 tires by “Eight” type with iron wires, a
nd pad wedges to secure tires, then hook rear axle with
iron wire.
● Turn rear-
view mirror clockwise as far as possible, or remove it if necessary while the hood, cab door
and window are all closed. If the machine is equipped with safety shelf, place the s
position and secure it firmly.
●
Note whether the high limitation is beyond or not when driving over culverts and bridges, and fully
decelerate when turning around.
● Release hand brake when unloading goods, engage forward gear, and drive away at lowest speed.
Note:
1.
When loading and unloading goods for tractor, the throttle shall be fully depressed and front and rear wheels
shall be firmly secured to avoid tractor and operating personnel from sudden overturned accident caused by
unexpected start of truck.
2.
When performing loading and unloading works, tractor shall drive at lowest speed to avoid tractor
overturning from upside or goods falling down caused by higher speed.
72
To Next Page
Loading...