Operation Instruction
Note: The two return stop position on the push rod
can be adjusted according to agricultural requirements and
equipped agricultural implement. The agricultural lifting/lowering height varies depending on the stop position on
the push rod.
The lifting stop and lowering stop is respectively control the lifting and lowering height of
agricultural implement.
3.14.3 Descent speed adjustment
The agricultural implement lowering speed can be controlled by
adjusting descent speed
.Select proper descent speed to avoid
damaging agriculture implement caused by impact when
agriculture implements contacting with ground. When delivery,
the descent speed adjusting valve is preliminarily adjusted. The
driver can readjust it according to
implement and ground hardness.
Clockwise rotating the adjusting valve A can decrease the
descent speed of agricultural implement.
Anticlockwise rotating the adjusting valve A can increase
the descent speed of agricultural implement.
Fig.3-18 Regulating valve schematic
Caution:
When the tractor with agriculture implement traveling for a long distance, the agriculture
implement should be locked by using hydraulic lock to avoid it sudden falling and eventual accident caused by
moving distributor control handle.
30
To Next Page
Loading...
