Operation Instruction
3.16.2.5 Lamp failure and troubleshooting
Table 3-14 Lamp failure and troubleshooting
Index: Failure Cause Troubleshooting
1
There is no
high and low
beam in
headlamp
(1) Circuit is shortcut or ope
fuse is burnout.
(2)
Dimmer switch is not well
connected or damaged.
(3) Filament is burnout.
(1) Check and repair the circuit.
(2) Repair or replace it
(3) Replace with high quality bulb.
2
Backup lamp
can not go on.
(1) Circuit is open.
(2)
Backup lamp switch is not well
connected or damaged.
(1) Check and repair the circuit.
(2) Repair or replace it
17
To Next Page
Loading...
