114
Find Streets command, left, Find Streets menu, right.
2. You must first fill in a street name in the First Street dialog box.
Press
ENT to display the Find By Name menu. There are two options:
A. You can spell out the street in the top selection box. Press ↑ or ↓ to
change the first letter, then press → to move the cursor to the next let-
ter and repeat until the name is correct, then press
ENT|ENT. B. Or you
can jump down to the lower box and pick a street from the selection
list. Press
ENT, then press ↓ or ↑ to select a street from the list and
press
ENT.
Find Street By Name menu. Spell out name in
the top box, or select from the list in the lower box.
3. The Find Streets menu reappears with the street you're searching
for in the First Street box. (In this example, it's 80th Street.) To search
for that street, press ↓ to
FIND FIRST STREET|ENT. A message appears ask-
ing you to wait while the unit finds the street. When the Streets Found
list appears, press ↑ or ↓ to select the street you are searching for and
press
ENT.
www.Busse-Yachtshop.de email: info@busse-yachtshop.de
To Next Page
Loading...
