73
Check MMC Files and Storage Space
To check MMC Files:
Press
MENU|MENU|↓ to BROWSE FILES|ENT.
Main Menu, left, Browse Files, right.
Communications Port Configuration
The unit has one NMEA 0183 version 2.0 compatible communication
port or com port for short. The Com Port Menu, which is accessed from
the System Setup Menu, allows you to configure the communications
port to send or receive data to another electronic device, such as an
autopilot. The com port can be used for NMEA data transfer.
Menus for changing Com Port settings.
For connectors and wiring information for another device, see page 17.
For assistance in configuring the unit to communicate with another
device, consult the factory; customer service phone numbers are in the
back of this manual. Also see the entry Configure NMEA. To set Com
Port Configuration:
1. Press
MENU|MENU|↓ to SYSTEM SETUP|ENT.
www.Busse-Yachtshop.de email: info@busse-yachtshop.de
To Next Page
Loading...
Need help?
General