To Next Page

To Previous Page

NOTE:

When adding waypoints to a route, the inserted waypoints will ap-

pear in the route in front of the waypoint you have selected. To in-

sert waypoints at the end of the route, make sure to select "(End of

route)" before adding them.

Navigate a Route

1. From the

NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE,

press

MENU|MENU|↓ to ROUTE PLANNING|ENT.

Selecting the Route Planning command on Main Menu brings up the

Routes menu, left. Edit Route menu, right. Navigate command is se-

lected in the Action box.

2. Press ↓ to select route name|ENT|↓ to NAVIGATE|ENT.

3. Upon arrival at your destination, cancel navigation:

press

The following figures show what the Navigation Page and Map Page

look like while navigating a route.

Navigate a Route in Reverse

Here's how you run a route backward, from the end waypoint to the

beginning waypoint:

1. From the

NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE,

press

MENU|MENU|↓ to ROUTE PLANNING|ENT.

2. Press ↓ to select route name|

ENT|↓ to NAVIGATE|→ to RE-

VERSE

|ENT|← to NAVIGATE|ENT.

3. Upon arrival at your destination, cancel navigation:

press

Lowrance GlobalMap 5200C GPS User Manual

Questions and Answers: