This chronograph watch has 3 functions:
TIME, CALENDAR, STOPWATCH
TIME
To set the time:
1. PULL crown to position 3.
2. TURN crown either way to correct time.
3. PUSH crown in to position 1.
CALENDAR
To set the calendar:
1. PULL out crown to position 2.
2. TURN crown clockwise to correct date.
3. PUSH in crown to position 1.
STOPWATCH
The stopwatch is capable of measuring:
1. Minutes elapsed up to 30 minutes (left eye).
2. Chronograph hand 1/5 second
BEFORE USING THE STOPWATCH, reset the stopwatch hands to the 60 position by mean of
pusher B. If stopwatch hands move improperly, reset the hands as follow:
Standard stopwatch measurement:
1. PRESS pusher A to start timing.
2. PRESS pusher A to stop timing.
3. PRESS pusher B to reset.
16
To Next Page
Loading...