EasyManua.ls Logo

Loyal Hands Watch - Page 18

Default Icon
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To reset stopwatch hands:
1. PRESS pusher A and B.
2. PRESS pusher B intermittently until the left eye hand is reset to 0
3. PRESS pusher A intermittently until the chronograph hand reset to 60
4. PRESS pusher A and b.
NOTE: PRESSING and HOLDING either pusher A or B will cause the hands to continue to move
until the pusher is released.
Accumulated elapsed time measurement:
1. PRESS pusher A to start timing.
2. PRESS pusher A to stop timing.
3. PRESS pusher A to restart timing.
4. PRESS pusher A to stop 2
nd
timing.
5. PRESS pusher B to reset.
Split time measurement:
1. PRESS pusher A to start timing.
2. PRESS pusher B to split.
3. PRESS pusher B to begin again.
4. PRESS pusher A to stop.
5. PRESS pusher B to reset.
Timing 2 competitors:
1. PRESS pusher A to start timing.
2. PRESS pusher B to stop timing of first event. Stopwatch continues to run internally.
3. PRESS pusher A to stop timing of 2nd event.
4. PRESS pusher B to view time of 2nd event
5. PRESS pusher B to reset.
17

Table of Contents