LS Industrial Systems GIPAM - GIMAC-II Operational Functions; Display Functions

6
;=A57!==IgYfAUbiU`
4 Operational functions
4-1 Display
GIMAC-II display the measuring the data by pressing the button in the lower part of the
front surface
of the GIMAC-II first and then selecting the data you want.
1) Voltage
. 1phase 2wire : displays the data by Voltage unit.
. 1phase 3wires: Displays the voltage by Vrn →Vtn →Vrt sequence, at each time you
press the touch switch button.
. 3phase 3wires: Displays the voltage by Vrs →Vst →Vtr sequence, at each time you
press the touch switch button.
. 3phase 4wires: Displays the voltage by Vrn →Vsn →Vtn →Vrs →Vst →Vtr
sequence, at each time you press the touch switch button.
2) Current
. 1phase 2wires: displays the data by Ampere unit.
. 1phase 3wires: Displays the voltage by Ir →In →It sequence, at each time you
press the touch switch button.
. 3phase 3wires, 3phase 4wires: Displays the voltage by Ir →Is →It sequence, at
each time you press the touch switch button.
3) POWER
. Press the touch switch button ‘W’ displays the power (W) and the ‘VAR’ button
displays the power (VAR).
4) WATT HOWER
. Press the touch switch button ‘WH’ displays the WH and the ‘VARH’ button displays
the VARH.
5) Power factor.
. Press the touch switch button ‘PF’ displays the power factor by % unit.
6) Frequency
. Press the touch switch button ‘F’ displays the frequency by 0.1HZ unit.