LS Industrial Systems GIPAM - GMPC-III System Configuration; Network Diagram

7
;AD7!===IgYfAUbiU`
4 system Configuration
4.1 Network Diagram
4.2 Standards for system configuration
Installation between GMPC and remote control & monitoring system is permitted point to
point topology on the network adopting RS-232 or RS-485 connection.
The Multi-drop network configuration has to be applied between the GMPC.
For synchronization, GMPC is capable to be connected up tp16ea (maximum) and one
of them has to be selected as Time Master.
RS-232C
Multi-serial
communication Board
GMPC#1
GMPC#2
GMPC#3
GMPC#4
I-NET
통신망
GIPAM
#1
GIMAC-II
#2
GIPAM
#3
GIPAM
#20
GIMAC-II
#4
DPR #1
GIMAC-III
#2
DPR #3
GIMAC-III
#4
DPR #20
DPR #1
DPR #2
DPR #3
DPR #4
DPR #20
GIMAC-III
#1
GIMAC-III
#2
GIMAC-III
#3
U-RTU
#4
U-RTU
#20
To be connected
When using S.O.E function
(For synchronization)