LS Industrial Systems GIPAM - GIPAM Protocol; Data Communication of GIPAM

31
;AD7!===IgYfAUbiU`
11 GIPAM Protocol
11.1 Data communication of GIPAM, SOE GIPAM
Device ID is GIPAM (GIPAM-115N : 82), SOE GIPAM (GIPAM-115S : 83)
GIPAM-115N does not respond to requesting data which is related to SOE function
or responds “ NAK Message” .
11.1.1 Status Data of GIPAM, SOE GIPAM
- Requesting status information
Command 10h
Sub Command -
- Status Data
Command 00h
Device ID 82h or 83h
Ir> Is> It> In> Ir>> Is>> It>> In>>
Operating Status of
Relays
OVR UVR VG> SGR VG>> 1 1 Sys.
CB Status - - - ON out OFF out Local* On in OFF in
Status of Reset/Clear SOE R’y Set L-Rst R-Rst Local* Clear Command Code**
Error Code in GIPAM
Data Check Sum Check Sum
* ‘1’ : Remote, ‘0’ : Local
** Clear Command Code
*** Checksum(1Byte) = ((Command 1Byte + Device ID 1Byte + Data 6Byte) / 256) ⇒ The residual
※ Checksum is the sum of each bytes not to include OVERFLOW
Clear Command Code
0000 Wh Clear
0001 Varh Clear
0010 SOE Buffer Clear
0011 CB ON Counter Clear
0100 CB ON Time Clear
0101 V0 Max. Clear
0110 All Clear
0111
1xxx
Clear Nothing