LS Industrial Systems GIPAM - Page 66

10
;AD7!===IgYfAUbiU`
5.4.2 It is capable to set the following items in the table via the front
panel of the GMPC.
Setting Parameters Setting Range
The Present Time Year/Month/Day/Min./Sec.
Selecting a TIME MASTER Selecting / Remove
SYNC BROADCAST Selecting / Remove
I-NET ADDRESS 0x00 ~ 0XFF
Choosing a PROTOCOL MODBUS / GMPC(I-NET)
RS232 / RS485 RS232 / RS485
Setting the PARITY BIT No / Odd / Even
2400
4800
9600
14400
19200
28800
33600
38400
56000
Communication Speed of RS232 / 485
standards.
(8 Data Bits, No Parity, 1 Stop Bit)
57600
5.4.3 It is capable to set the following items in the table via the Remote
Control Center.
Setting Parameters Setting Range
The Present Time Year/Month/Day/Min./Sec.
Selecting a TIME MASTER Selecting / Remove
SYNC BROADCAST Selecting / Remove
I-NET ADDRESS 0x00 ~ 0XFF