To Next Page
P
Peter PageSep 6, 2025
What does IO Board Trip mean on my LSIS Inverter?
- HHeather PooleSep 6, 2025
The LSIS Inverter indicates an IO Board connection fault trip.
What does IO Board Trip mean on my LSIS Inverter?
The LSIS Inverter indicates an IO Board connection fault trip.
What does Over Load mean on my LSIS H100 Inverter?
The LSIS Inverter indicates a motor overload fault trip.
What does Thermal Trip mean on my LSIS H100 Inverter?
The LSIS Inverter indicates a motor overheating trip.
What does Ground Trip mean on my LSIS Inverter?
The LSIS Inverter indicates a ground fault trip.
What does External Trip mean on my LSIS Inverter?
The LSIS Inverter tripped due to an external signal.
What does Inverter OLT mean on my LSIS H100?
The LSIS Inverter indicates an inverter overheating trip.
What does Damper Err mean on my LSIS H100 Inverter?
The LSIS Inverter indicates a damper Err trip.
What does No Motor Trip mean on my LSIS H100?
The LSIS Inverter indicates a no motor fault trip.
What does NTC Open mean on my LSIS H100?
The LSIS Inverter indicates a temperature sensor fault trip.
What does Out Phase Open mean on my LSIS Inverter?
The LSIS Inverter indicates an output open-phase fault trip.
General| Overload Capacity | 150% for 60 seconds |
|---|---|
| Braking Unit | Built-in |
| Control Method | V/F Control, Sensorless Vector Control |
| Cooling Method | Forced Air Cooling |
| Altitude | Up to 1000m without derating |
| Input Voltage | 380V - 480V |
| Input Frequency | 50Hz/60Hz |
| Output Voltage | 0 to Input Voltage |
| Output Frequency | 0.1 to 400Hz |
| Protection Functions | Overvoltage, Undervoltage, Overcurrent, Overload, Overtemperature, Short Circuit |
| Communication | RS485 (Modbus RTU) |
| Operating Temperature | -10 to 50°C |
| Storage Temperature | -20°C ~ +65°C |
| Humidity | 5% to 95% RH (non-condensing) |
