LSIS H100 Troubleshooting Manual

3
Introduction
Manual Composition
1.1 Before you think it failed
1.2 Basic Operations
1.3 Parameter Change
1.3.1 Carrier Frequency Change
1.3.2 Initializing All Parameters
1.3.3 Read and Write Parameters
1.4 Fault Trip Monitoring
2.1 Trips and Warning
2.1.1 Failure/Warning List
2.1.2 Troubleshooting Fault Trips
2.2 Troubleshooting Other Fault
3.1 Regular Inspection List
3.1.1 Daily Inspections
3.1.2 Annual Inspections
3.1.3 Bi-Annual Inspections
3.1.4 Check Input/Output Module
3.1.5 Replace Cooling FAN
3.2 Storage and Disposal
3.2.1 Storage
3.2.2 Disposal
This section explains troubleshooting
fault trips and other common faults.
If problems are not solved, please
contact your vendor or LSIS.
This section provides information
on how to maintain the inverters on
a regular basis for different time
periods.
When there is a problem in the
inverter, please check the
input/output module. This is the
basic method to check the
hardware.
This section covers check points
when there is a problem in the
inverter.
Then check the parameter settings
using basic operations and the trip
records.
2 Troubleshooting
1 Basic Checklist
3 Maintenance

LSIS H100 Specifications

General

Brand	LSIS
Model	H100
Category	Inverter
Language	English