1. Basic Checklist
18
Fault Trip Monitoring 1.4
Failure during operation
If a fault trip occurs during inverter operation, the inverter enters
Trip mode automatically and displays the type of fault trip that
occurred.
Press the [Down] key to view the information on the inverter at the
time of fault, including the output frequency, output current, and
operation type.
If there were any fault trips that occurred previously, press the
[Right] key to display the fault trip information at the times of
previous fault trips.
When the inverter is reset and the fault trip is released, the keypad
display returns to the screen it was at when the fault trip occurred.
To Next Page
Loading...
Need help?
General