LSIS H100 - Parameter Change

1. Basic Checklist
14
Parameter Change 1.3
Carrier Frequency Change 1.3.1
The following example demonstrates how to configure Carrier Frequency by modifying CON group 04
code(Carrier Frequency) from 3.00(Hz) to 10.00(Hz). You can configure the parameters for different
codes in any other group in exactly the same way.
Step
Instruction
Keypad Display
1
Monitor Mode is displayed.
2
Shift to CON by using Mode key.
3
Shift to code 04 using Down key.
Press PROG.