Need help?Do you have a question about the LTE Touchclave Ecotech Series and is the answer not in the manual?
Important safety rules and operational guidelines before use.
Guidelines for installing the autoclave, including manual handling and lifting points.
Essential safety rules and precautions for operating the autoclave, including PPE.
General operator tasks for daily maintenance to ensure system reliability.
Details on the autoclave's core components like touchscreen, condensate unit, and steam generator.
Outlines the main stages of the sterilising cycle: water fill, air removal, heat up, etc.
Details the safety relief valves and their pressure settings for steam generator and chamber.
Covers the screen for entering passwords to access different user levels.
Details the screen for viewing and managing active alarms, including silencing and resetting.
Steps involved in initiating a sterilisation cycle, including door closure and cycle selection.
How to save machine cycle data onto a USB memory stick using the Data Archiving menu.
Alarm for steam purge stage failure to reach temperature targets within the set time.
Alarm for heatup stage failure to reach temperature targets within the set time.
Alarm for stabilisation stage failure to maintain temperature within the set band.
Alarm for cooling stage failure to reach temperature targets within the set time.
Alarm when temperature falls below the sterilisation threshold.
Alarm when temperature exceeds the sterilisation threshold.
Alarm triggered by loss of power to the machine during a cycle.
Alarm indicating chamber pressure transducer malfunction or incorrect reading.
Alarm indicating steam generator transducer malfunction or incorrect reading.
Alarm indicating vent temperature probe malfunction or incorrect reading.
Alarm indicating load temperature probe malfunction or incorrect reading.
Alarm when the heater over-temp thermostat on the element has tripped.
Alarm for excessive chamber pressure during the steam purge stage.
Alarm for failure of the pre-vacuum stage to reach set pressure within the time period.
Alarm indicating the chamber pressure has exceeded the maximum value for the given stage.
Alarm when sterilisation temperature exceeds the upper limit of one or more probes.
General| Brand | LTE |
|---|---|
| Model | Touchclave Ecotech Series |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
