Touchclave Ecotech
32
4.2 Cycle in progress
The process screen is displayed during the cycle showing current instrumentation readings, stage of
the cycle and relevant timers and pressure/ temp targets. This screen provides user with all relevant
cycle information (as detailed in section 3.3).
4.3 End of cycle- Cycle Passed
At the end of the cycle, the Touchscreen will display if the cycle passed or failed. If the cycle has
passed, this will be displayed on the screen. The user can remove the load from the autoclave at this
point by pressing the “Continue” button. The user may have to login to remove the load, if so the
login screen will be displayed and the door will unlock on entering an authorised password.
To Next Page
Loading...