Lucent Technologies Lineage
®
2000 ECS Battery Plant J85500D-3
Issue 5 January 1999 Engineering, Planning and Ordering 3 - 29
Ordering
reference
material
This manual contains all the needed planning and ordering
information for the ECS Battery Plant J85500D-3. Some
customers may prefer to prepare plans and orders from
manufacturing, wiring and schematic drawings. Read the
following sections to learn how to order Lucent Technologies
equipment from these drawings.
Coding and
terminology
The two main categories of Lucent Technologies hardware are
called apparatus and equipment. The battery plant ordering
process primarily involves equipment for the system and
apparatus for components and replacements.
An apparatus code identifies one specific arrangement of
hardware. The product is available in one form only. Lucent
Technologies Coded Apparatus is always specified by the code
followed by the descriptor. For example:
• BAA1 Circuit Pack
• 364A Power Unit
• 113B Control Unit
The vintage or version of coded apparatus is controlled by a
series number. The series number may be appended to the
apparatus code for a complete description of the product, but is
not necessary because only the latest vintage is orderable at any
given time. Apparatus-coded components for a battery plant are,
typically, replacement parts and spares. (See Section 5, “Spare
Parts”.)
Equipment-coded hardware is available in different
configurations with combinations of optional features. The total
number of combinations and permutations of the optional
features on a given product may be in the hundreds or thousands.
For this reason, a unique code is not assigned to each
combination of options. Instead, a main code is specified, which
is followed by a list of identifiably separate options with the
quantities for each option.
The main code number falls into one of three categories:
• J-code
• ED-code
• H-code
To Next Page
Loading...
Need help?
General
