MERLIN LEGEND Communications System Release 6.1
System Programming and Maintenance (SPM)
555-661-140
Issue 1
August 1998
Programming with SPM
Page 85
Upgrading the System
11, then the features listed in Table 12, then the features
listed in Table 13, then the features listed in Table 14, then
the features listed in Table 15, then the features listed in
Table 16.
— When you upgrade from Release 1.1 to Release 6.1, you
must program the features listed in Table 8, then the
features listed in Table 9, then the features listed in Table
10, then the features listed in Table 11, then the features
listed in Table 12, then the features listed in Table 13, then
the features listed in Table 14, then the features listed in
Table 15, then the features listed in Table 16.
— When you upgrade from Release 1.0 to Release 6.1, you
must program the features listed in Table 7, then the
features listed in Table 8, then the features listed in Table 9,
then the features listed in Table 10, then the features listed
in Table 11, then the features listed in Table 12, then the
features listed in Table 13, then the features listed in Table
14, then the features listed in Table 15, then the features
listed in Table 16.
Table 7. Programming Needed after Upgrade to Release 1.1
Feature Sequence
System language
6\V3URJUDP→More→/DQJXDJH→6\VWHP/DQJ
Extension language 6\V3URJUDP→More→/DQJXDJH→([WHQVLRQV
SMDR language 6\V3URJUDP→More→/DQJXDJH→60'5
Printer language 6\V3URJUDP→More→/DQJXDJH→3ULQWHU
To Next Page
Loading...
Need help?
General
