MERLIN LEGEND Communications System Release 6.1
System Programming and Maintenance (SPM)
555-661-140
Issue 1
August 1998
Programming with SPM
Page 31
Using SPM
Table 3. SPM Main Menu Options
SPM Help
To access the SPM help screens, press
<
+
.
To review the help screens press,
and
.
* SPM option only. Not available on the MLX-20L system programming console. To be
used only by qualified service personnel.
SPM Menu
Option Function
6\V3URJUDP
To program the system
%DFNXS
*
To make a backup copy of your system programming and store
it on diskette or on hard disk
%RDUGV
*
Shows which modules (port boards) are in each slot of the
control unit and allows you to assign boards to slots
3ULQW2SWV
*
Directs reports to the printer or to the PC for storage on diskette
or hard disk
0RQLWRU
Restricted to use by your technical support organization
0DLQWHQDQFH
Restricted to use by your technical support organization and
qualified technicians
5HVWRUH
*
To restore your system programming from diskette or hard disk
3DVV7KUX
(IS II/III only) To make a remote connection, through the control
unit, to an IS II/III PC to administer applications on the IS II/III
PC.
3DVVZRUG
*
To change the password for remote entry into the system.
/DQJXDJH
To select a language (English, French, or Spanish) for the
console simulation window on the PC. (There is also a
Language option available on the System Programming menu
that allows you to set the system language.)