Lucent Technologies MERLIN LEGEND Release 6.1 System Programming And Maintenance

MERLIN LEGEND Communications System Release 6.1
System Programming and Maintenance (SPM)
555-661-140
Issue 1
August 1998
Programming with SPM
Page 13
Installing the SPM Software
Table 1. SPM Configuration File (ams.cfg) Options
Follow the steps below to perform the SPM initialization.
!Type
VSP and press 1 to display the SPM Welcome screen
shown in Step 2.
■ Make your entry at the C:> prompt if your PC
has a hard disk.
■ Make your entry at the A:> prompt if you are
using the floppy drive.
Option Use
VSPFRP
Specifies COM1 as the serial communications port
used by SPM
VSPFRP
Specifies COM2 as the serial communications port
used by SPM
VSPV
Specifies modem speed of 1200 bps
VSPV
Specifies modem speed of 2400 bps
VSPFRORU
Specifies color monitor
VSPPRQR
Specifies monochrome monitor
VSPHQJOLVK
Specifies English as the PC language
VSPIUHQFK
Specifies French as the PC language
VSPVSDQLVK
Specifies Spanish as the PC language

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English