Lucent Technologies MERLIN LEGEND Release 6.1 System Programming And Maintenance

MERLIN LEGEND Communications System Release 6.1
System Programming and Maintenance (SPM)
555-661-140
Issue 1
August 1998
Programming with SPM
Page 70
Upgrading the System
■ To print the reports to a floppy disk if the print file does not exist,
use the arrow keys to highlight
0$.(1(:),/( and press
1
.
— To save to the default print filename (
SULQWDPV ), press
1
.
— To save to the filename of your choice, type [
filename ] and
press
1
.
■ To print the reports to a floppy disk if the print file already exists,
use the arrow keys to highlight the [
filename ] and press
1
.
Upgrading the System
!
WARNING:
!
The following procedures are to be used by qualified technicians or service
personnel only. Installation or maintenance of this product by anyone other
than qualified personnel may damage or impair the product; your limited
warranty does not cover such damage. For details, see your limited
warranty in the Customer Support Information in the back of this book.
Hazardous electrical voltages are present inside this product.
This section describes upgrading your communications system to
Release 6.1. You can use this procedure to perform the following
upgrades:
■ From Release 1.0 to Release 6.1
■ From Release 1.1 to Release 6.1
■ From Release 2.0 to Release 6.1
■ From Release 2.1 to Release 6.1
■ From Release 3.0 to Release 6.1
■ From Release 3.1 to Release 6.1
■ From Release 4.0 to Release 6.1

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English