Lucent Technologies MERLIN LEGEND Release 6.1 System Programming And Maintenance

MERLIN LEGEND Communications System Release 6.1
System Programming and Maintenance (SPM)
555-661-140
Issue 1
August 1998
Programming with SPM
Page 93
Upgrading the System
Table 14. Programming Needed after Upgrade to Release 5.0
Continued on next page
Feature Sequence
CTI Link Busy out the board first:*
Menu
→0DLQWHQDQFH→6ORW→Dial the slot
no.
→(QWHU→%XV\2XW→<HV
* This is a Maintenance step. Start the procedure from the
main menu, not the System Programming screen.
Program the CTI Link (Note: The switch must be in
Hybrid/PBX mode):
$X[(TXLS→&7,/LQN→Dial extension
number
→(QWHU→([LW→([LW
Restore the slot:*
Menu
→0DLQWHQDQFH→6ORW→Dial the slot
no.
→(QWHU→5HVWRUH→<HV
* This is a Maintenance step. Start the procedure from the
main menu, not the System Programming screen.
NOTE:
If the MLX module containing the CTI Link is the first module, use the
SPM program to busy-out the slot.
Calling Group Alarm
Thresholds
([WHQVLRQV→More→*US&DOOLQJ→4XHXH$ODUP→Dial
calling group ext. no.
→(QWHU→$ODUP7KUHVKROG or
$ODUP7KUHVKROGor $ODUP7KUHVKROG
→Drop→Dial
no. of calls
→(QWHU→([LW→([LW
HotLine ([WHQVLRQV→More→More→+RW/LQH→Enter HotLine
extension
→(QWHU→([LW→([LW
Calling Group Hunt
Type
([WHQVLRQV→More→*US&DOOLQJ→+XQW7\SH→Dial
calling group ext. no.
→(QWHU→&LUFXODU, /LQHDU, or 0RVW
,GOH
→(QWHU→([LW→([LW→([LW
Group Calling Delay
Primary
Announcement
([WHQVLRQV→More→*US&DOOLQJ→'HOD\$QQFH→Dial
calling group ext. no.
→(QWHU→3ULPDU\$QQRXQFHPHQW→
Enter Exstenion number of Announcent device→(QWHU
(to program another Announcement device) or
([LW (to
end procedure)
→([LW

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English