MERLIN LEGEND Communications System Release 6.1
System Programming and Maintenance (SPM)
555-661-140
Issue 1
August 1998
Programming with SPM
Page 32
Using SPM
To return to the first help screen, press
.
To exit from SPM help, press
.
A typical help screen is shown in Figure 6.
Figure 6. SPM Help
Backup
The Backup procedure is used by qualified service personnel to create a
file of system programming information either in the \spm\backup
directory (on the hard drive of the PC) or in the root directory of a
diskette (on the floppy disk drive of the PC).