MERLIN LEGEND Communications System Release 6.1
System Programming and Maintenance (SPM)
555-661-140
Issue 1
August 1998
Programming with SPM
Page 29
Using SPM
Table 2. Function of PC Keys in SPM
PC Key Console SPM Function
Home Quit. Exit from SPM and return to the DOS prompt
when you finish with system programming. If you are
using a modem, the call is disconnected.
Menu Return to the SPM Main Menu.
More Display more menu items (when there is another
screen and the > symbol appears next to the key).
Inspct Show the current information that has been
programmed for a feature or button.
7%/%P Drop Enter a stop in a speed dialing sequence. This
combination also deletes an entry in a field on any
screen except one in which you are entering a
speed dialing sequence.
7%/%F Conf Flash. Enter a switchhook flash in a speed dialing
sequence.
7%/%C n/a TopSP. Return to the top of the System
Programming menu.
7%/%H Hold Pause. Enter a pause in a speed dialing sequence.
7%/%U n/a Convert. Convert a backup file from its original
Release format to a different Release format.
7%/%n n/a Toggle modem speed between 1200 and 2400 bps.
<%/%
n/a Help. Display a help screen about SPM operations.
To exit from Help, press
.
<%/%
n/a Reset. Reset the communications port. For
example, if the information on the screen is garbled,
try exiting from and then re-entering the screen. If
the screen remains garbled, use < + to clear
the screen and return to the SPM Welcome screen.
Note that using < + drops the modem
connection.
<%/%
n/a Browse. View print reports saved with Print Opts.
Continued on Next Page
To Next Page
Loading...
Need help?
General
