Lucent Technologies MERLIN LEGEND Release 6.1 System Programming And Maintenance

MERLIN LEGEND Communications System Release 6.1
System Programming and Maintenance (SPM)
555-661-140
Issue 1
August 1998
Programming with SPM
Page 46
Using SPM
Press
1
to select another filename, or press
0
to abort the
convert procedure.
■ If the backup file you select can be converted, go to Step 6.
!Observe the updated file selection screen and press
1
.
!Observe the CONVERT TO screen. Select the CONVERT TO release
then press
1
.
The example screen below appears when converting from Release 1.0
or 1.1. The actual CONVERT TO releases displayed will be dependent
upon the release of the backup file that was selected in Step 4.
NOTE:
If the CONVERT TO screen is not displayed, an invalid CONVERT
FROM filename was specified. Quit SPM and restart the
procedure.
!Follow the instructions for a floppy or a hard disk.
FILENAME.XXX =the backup filename
3OHDVHVHOHFWILOHQDPH
selected in Step 4
WRFRQYHUWIURP
N = drive
WKHQSUHVV(QWHU
1),/(1$0(;;;
3UHVV(6&WRDERUW
3OHDVHHQWHU\RXU
All characters must be entered as they
&219(5772UHOHDVH
appear on the screen, including the
DQGSUHVV(17(5
decimal point.


 
(QWHUQXPEHU[[

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English