IGA 320/23-LO Operating Manual Reference numbers
33
8 Reference numbers
8.1 Reference numbers instrument
Reference Numbers
(RS485)
Reference Numbers
(RS232)
Fiber length 1 m, Ø 0.6 mm
(green fiber mark)
Fiber length 1 m, Ø 0.4 mm
(blue fiber mark)
Fiber length 2.5 m, Ø 0.4 mm
(blue fiber mark)
Fiber length 2.5 m, Ø 0.2 mm
(red fiber mark)
Ordering note:
A connection cable is not included in scope of delivery and has to be ordered separately.
8.2 Reference numbers accessories
3 920 030 Connection cable (RS485 versions), 12 wire, with 8 pole straight connector, 2 m
3 920 040 Connection cable (RS485 versions), 12 wire, with 8 pole straight connector, 5 m
3 920 050 Connection cable (RS485 versions), 12 wire, with 8 pole straight connector, 10 m
3 920 060 Connection cable (RS485 versions), 12 wire, with 8 pole straight connector, 15 m
3 920 070 Connection cable (RS485 versions), 12 wire, with 8 pole straight connector, 20 m
3 920 080 Connection cable (RS485 versions), 12 wire, with 8 pole straight connector, 25 m
3 920 090 Connection cable (RS485 versions), 12 wire, with 8 pole straight connector, 30 m
3 920 130 Connection cable (RS485 versions), 12 wire, with 8 pole angled connector, 2 m
3 920 140 Connection cable (RS485 versions), 12 wire, with 8 pole angled connector, 5 m
3 920 150 Connection cable (RS485 versions), 12 wire, with 8 pole angled connector, 10 m
3 920 160 Connection cable (RS485 versions), 12 wire, with 8 pole angled connector, 15 m
3 920 170 Connection cable (RS485 versions), 12 wire, with 8 pole angled connector, 20 m
3 920 180 Connection cable (RS485 versions), 12 wire, with 8 pole angled connector, 25 m
3 920 190 Connection cable (RS485 versions), 12 wire, with 8 pole angled connector, 30 m
3 920 100 Adapter cable (0.2 m) 8 pin onto 12-pin IMPAC standard connector
(RS485 versions only)
3 921 030 Connection cable (RS232 versions), 2 m (straight connector)
3 921 040 Connection cable (RS232 versions), 5 m (straight connector)
3 852 290 Power supply NG DC for carrier rail mounting housing
(100 ... 240 V AC, 50 ... 60 Hz ⇒ 24 V DC, 1 A)
3 852 550 Power supply NG 2D carrier rail mounting housing
(85 ... 265 V AC ⇒ 24 V DC, 600 mA, with 2 limit switches)
3 853 610 USB LabKit, adapter RS485 to USB with targeting light push-button and analog
output clamp, pyrometer cable, power supply 100 to 240 V AC
3 852 600 USB nano: Converter RS485 ⇔ USB
3 826 750 USB to RS485 adapter cable, HS-version, 1.8 m long
3 852 580 RS232 to USB converter (matched to DA 6000-T)
3 890 650 DA 4000, LED-display, 2-wire power supply, 2 limit switches (relay contacts)