Lumens CL510 - Page 14

English -
13
4.6.2 Set up the Default Zoom
1. Press [FREEZE] -> [DEL] -> [ENTER] on the remote control to enter the Service
Menu.
2. Press [] or [] to select the [Image] menu.
3. Press [] to <Without Close-up Lens> -> [ Default Zoom Setting].
<Note> If Close-up Lens (Optional) was installed, select <With Close-up Lens>
for operation.
4. Press [] or [] to enter the type required. (The setting is subject to posterior
changes made to AF Table)
5. Press [MENU] to exit the Service Menu.
6. Press [MENU] again to enter the [Advanced], and activate [Factory Reset].