English - 25
To shoot fast-moving objects, AF Sensitivity can be set to [High] or [Medium], which is applicable to quick
focus.
When the environment is too dark to enable auto focus or fixed objects have to be shot in different brightness,
AF Sensitivity can be set to [Low].
1. Press [MENU] to activate the setting menu.
2. Press [] or [] to select [Auto Focus].
3. Press [ENTER] to activate.
4. Press [] or [] to select [AF Sensitivity].
5. Press [ENTER] to activate.
6. Press [] or [] to select [High / Middle / Low].
7. Press [MENU] to exit.
6.8.2 Adjust the AF speed
The focus speed upon triggering AF Sensitivity
[Normal] (default): Image flickering may not occur
[Fast]: Fast focus speed
1. Press [MENU] to activate the setting menu.
2. Press [] or [] to select [Auto Focus].
3. Press [ENTER] to activate.
4. Press [] or [] to select [AF speed].
5. Press [ENTER] to activate.
6. Press [] or [] to select [Fast / Normal].
7. Press [MENU] to exit.
6.9 I would like to set the image mode
1. Press [Picture] on the remote control to switch [Off / Neg / B&W].
6.10 I would like to freeze images
1. Press [Freeze] on the remote control to freeze the current image on the display.
6.11 I would like to rotate the image
1. Press [Mirror] on the remote control to switch [Off / Mirror / Flip / Mirror + Flip].
6.12 I would like to change the camera direction
1. Press [L/R Direction Set] on the remote control to switch [L/R Direction / Normal].
6.13 I would like to display the current status
1. Press [Info] on the remote control to display the current status information. `
6.14 I would like to reset to the default value
Reset to default value using OSD menu or Remote Control combination key
OSD menu: Press [MENU] [System] [Factory Reset] [On] [Enter] on the Remote Control and reset
to the default value
Remote Control combination key: press [+] [8] [8] [6] [Enter] one by one on the Remote Control
in order to reset to the default value
To Next Page
Loading...
Need help?
General
